ETEPON Digital Oscilloscope Kit DSO Shell 2.4” TFT with BNC-Clip Cable Probe (Assembled Finished Machine) EM001
Free Shipping Included! ETEPON Digital Oscilloscope Kit DSO Shell 2.4” TFT with BNC-Clip Cable Probe (Assembled Finished Machine) EM001 by ETEPON at Budin Consult. MPN: EM001. Hurry! Limited time offer. Offer valid only while supplies last. ETEPON EM001 oscilloscope kit is an assembled finished machine which can be used directly.Unlike DIY oscilloscope kit, you don’t need to do
Unlike DIY oscilloscope kit, you don’t need to do assembly or soldering work before using, which will avoid some problem caused on soldering or assembling process and save your time.
Great Replacement for DSO138
✔ Extended both in width and height
✔ Added the rotary encoder, makes parameter adjustment more quicker and easier.
✔ Easily capture instantaneous wave forms using the Auto/Normal/Single Trigger mode.
✔ Display and MCU are mounted on the same board (main board) to avoid using inter-board pin-headers. Analog channel is placed on a separated board which contains most user install parts, so the analog and digital circuits can be better separated.
Number of Channel: 1
Analog Bandwidth: 0 - 200KHz
Sensitivity: 5mV/Div - 20V/Div
Input Impedance: 1M ohm
Maximum Input voltage: 50Vpk
Coupling: DC, AC, GND
Trigger Modes: Auto, Normal, Single
Trigger Types: Rising/falling edge
Trigger Position: 1/2 of buffer size fixed
Display: 2.4 inch color TFT LCD with 320 x 240 resolution
Power Supply: 9V DC (8 - 10V acceptable), NOT INCLUDED
Dimension: 115mm X 75mm X 22mm
Weight: 100 gram (not including cables and power supply)
1 * DSO Shell Oscilloscope
1 * BNC-clip cable
1 * Users Manual
1. DSO Shell runs on 9V power adapter. The power supply voltage must not exceed 10V. Otherwise it is possible to burn out the machine. 9v dc power supply should be center positive.
2. The kit does not contain a power adapter, it is quite easy to get one. Please prepare yourself.
Features & Highlights
- 【ASSEMBLED FINISHED】► ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine with DSO shell. No soldering / assembly work needs. It can be used directly to avoid assembling /welding process problems and greatly save your time.
- 【UPGRADED VERSION FROM DSO138】 ► The sensitivity of the EM001 has been extended both in width and height, which is wider and higher than the DSO138. It reaches 5mV / div - 20V / div, while DSO138 is only 10mV / div - 5v / div.
- 【HAND-HELD】 ► This updated digital oscilloscope can be hand-held, while DSO138 can only be used by placing it on the desktop.
- 【ROTARY ENCODER】► It has been added the rotary encoder, makes parameter adjustment more quicker and easier.
- 【WHAT YOU GET】► You will get a assembled DSO shell oscilloscope and BNC-clip cable. Detailed Operation instructions, troubleshooting guide and schematic are also provided.
|Package Weight:||0.26 pounds|
|Package Size:||4.02 x 1.5 x 1.5 inches|